Hỗ trợ trực tuyến

Hỗ trợ khách hàng

Hãy liên hệ trực tiếp với LINH KIỆN XE để chúng tôi hỗ trợ kiểm tra chính xác mã phụ tùng ô tô bạn đang cần tìm.

Admin
Admin
 
Skype

Bán hàng 1

Skype

Bán hàng 2

HOTLINE: 0903.441.000 

Số người ONline

Trang web hiện có:
446 guests & 22 members trực tuyến

Best Soldering Iron Under 50

Best Soldering Iron Under 50

9. Finishing - the entire process of covering the pad areas by having a thin layer of solder to prepare the board for the ultimate wave soldering or reflow soldering procedure that will occur later on after the components have now been placed.

soldering station board10. Silk Screening - the process of using the markings for component designations and component outlines to the board. Might be put on simply the side that is top to both sides if elements are mounted on both top and bottom sides.

11. Routing - the process of splitting multiple panels from a panel of identical panels; this technique also allows cutting notches or slots in to the board if needed.

12. Quality Control - a inspection that is visual of boards; may also be the means of inspecting wall quality for plated through holes in multilayer boards by cross-sectioning or other methods.

13. Electrical Testing - the entire process of checking for continuity or shorted connections in the boards by means using a voltage between various points on the board and determining if a flow that is current. Depending upon the board complexity, this technique may need a especially designed test fixture and test system to integrate with the test that is electrical employed by the board manufacturer.
To understand about soldering station price and best soldering iron for the money, please visit all of our site best soldering iron under 100.
Brazing

Brazing is just a process of joining two metals alloy filler that is using. The two parts are joined by heating and melting the filler. Any filler utilized will need to have a lesser melting point compared towards the main steel pieces. This can be a method that is practical joining different types of metals, such as for example nickel, silver, copper, silver and aluminum. Also, the brazing procedure relies on flux to make it more straightforward to join the components. This may be a sort of lubricant which makes it easier for the filler to flow and fill the appropriate join. A further benefit is its capacity to clean the part areas that are being bonded together. Brazing isn't quite as strong as welding, it is nevertheless an extremely choice that is reliable joining two different types of metals.

Soldering

soldering station boardSoldering is comparable to blazing, but operates at a lower temperature range. This technique hinges on solders or fillers being meant to melt at 450° C or below. There are numerous metals which are effortlessly soldered, including iron, metal, copper, silver and gold. After the filler reaches the desired heat to melt, it shall quickly solidify to bond the metal parts. This type of joint doesn't have the potency of welding or brazing. The initial solder ended up being lead-based, but as a result of ecological issues these day there are safer options.

KẾT NỐI CHÍ THẢO AUTO

Giới thiệu

Phụ tùng ô tô Chí Thảo chuyên cung cấp các loại phụ tùng ô tô chính hãng, giá rẻ … xem thêm

Dịch vụ

  • Đồ chơi xe hơi
  • Lắp đặt camera hành trình
  • Lắp đặt dàn âm thanh
  • Bọc nệm ghế da
  • Dán phim cách nhiệt
Facebook chat